Mô tả sản phẩm
The services crossing are points of conflict since the fire can quickly spread through them as they facilitate the transmission of smoke and hot gases.
In modern buildings, the complexity in the installations significantly increases, therefore its influence must be considered when the compartmentations are designed.
The risk of fire propagation must be reduced by using Sealing Systems for penetrations, in the points where the services cross through the fire compartments
Lợi ích sản phẩm
TESTS
Mercor tecresa® constantly evolves and adapts to the changes in standards, developing new tests in official labs certified by ENAC or other similar international entities, pursuant to UNE EN, BS, UL, etc.
Our dedication to the comprehensive development of the Tecsel® sealing systems has led us to perform customer-specific tests at their request.
TRACEABILITY
The sealing systems undergo an internal quality control that provides guaranteed knowledge of the history, location and path of our batches.
QUALITY
All Tecsel® products are subject to rigorous controls to ensure they possess the precise specifications of their design.
Our end goal is for our customers to be fully satisfied with the quality of our products.
SPECIALISATION
Our aim is that each individual and concrete case that we come across in our daily work has a specific and effective solution.
APPLICATION
We seek to provide the greatest ease and speed in our assemblies, making our solutions the most competitive on the market.
TECHNICAL ASSISTANCE
The technicians working in our sales department offer personalised customer care and advice, both in terms of building solutions and regulations.
INTERNATIONAL DEVELOPMENT
Both directly and through the Mercor®Group, companies mercor tecresa® sells its products all over the world, aiming to become a benchmark company in thepassive fire protection sector.
Chứng chỉ sản phẩm
- Thông tin sản phẩm
- Bình luận
TECSEL® SEALING SYSTEMS
The services crossing are points of conflict since the fire can quickly spread through them as they facilitate the transmission of smoke and hot gases.
In modern buildings, the complexity in the installations significantly increases, therefore its influence must be considered when the compartmentations are designed.
The risk of fire propagation must be reduced by using Sealing Systems for penetrations, in the points where the services cross through the fire compartments.
The DB SI indicates that the required fire resistance of the fire compartmentation elements must be maintained in the points where such elements are traversed by installations, such as cables, pipes, ducts, ventilation ducts, etc; excluding the penetration whose services crossing do not exceed 50 cm2. To that end, we can place an element, which in case of a fire, automatically blocks the services crossing and guarantees in such point a fire resistance at least equal to that of the traversed element, for example a blocking intumescent device.
However, in the event of having several gaps under 50 cm2, but close enough to pose a risk, we must proceed as follows:
- The gaps separated less than 3 m to each other must add up their services crossing, for the purpose of determining whether it is needed to maintain the fire resistance of the compartment element or not.
Tecsel® Products
Tecbor® Joint paste ready to use
Tecsel® Intumescent mastic
Tecsel® Foam
Tecsel® Grilles
Tecsel® Pillows
Tecsel® Collar
Tecsel® Bands
Your Benefits
PROVIDE
ACOUSTIC ABSORPTION
PROVIDE
THERMAL INSULATION
PROVIDE
FIRE PROTECTION
